Make your own free website on Tripod.com

logotext1.jpg

Foredom Carving Accessories

Home
Bonsai Vault
Bonsai Pots
Bonsai Tools
Bonsai Soil
Bonsai Health
Bonsai Workshops
Bonsai Propagation
Bonsai Training Wire
Sharpening Services
Bonsai Trees & Material
Information
Register
Links

There are many different accessories from Foredom. So many that we can not list them all here. What we listed is items that we have used with great success for bonsai carving. If there is something that you wish from Foredom that you don't see here. Let us know and we will be happy to acquire them for you.
 
Below is the list for hand pieces and accessories that are helpful as they pertain to carving deadwood. As you expand your carving experience with Foredom tools you will find these invaluable.
 
Bookmark this page and check back often. We will be building on our bits and tools frequently.

No. 44T Hand piece
Collet type hand piece that accommodates accessories with up to 1/4" diameter shanks. Prelubricated ball bearings require no maintenance. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories. Included in 2276 S motor,and 5240 SR Woodcarving Kit. This hand piece is outstanding for general carving. It will take the finest burs up to big aggressive cutting bits such as the samurai. The hand piece is large enough to give a positive grip when using with large bits, but small enough to get into places only the big tools dream about.

50.00 if sold separately

 

No. 43T Handpiece-NEW!
Same as the popular 44T collet-style handpiece, except 1" shorter. Ideal for using larger accessories in difficult to reach and interior spaces. Accomodates accessories with up to 1/4" diameter shanks. We offer this hand piece as an option to the versatile 44T. In variably a person will always come a cross a situation where they wish they had a hand piece that was a bit shorter. For those impossibly tight spots we offer this for your consideration.

$50.00

 

 

No. 8D Handpiece
Slim collet handpiece for fine detail work. Prelubricated ball bearings require no maintenance. Chuck guard slides back when changing burs. Comes with 3/32" and 1/8" collets and chuck wrenches for changing collets and accessories. A Duplex Spring provides extra flexibility to the handpiece. This hand piece is for fine carving and getting into tight places that no other power carving tool can. With its spring action handle it allows you to make the tight turns around hollows and multiple small branches. This hand piece is very light and nimble.

72.00


 

No. 50C Handpiece
Foredom's Chisel Handpiece with set of 6 stainless steel chisels.

$70.00


Foredom's new chisel handpiece gives a power assist to carving projects in all types of wood, plastic and plaster. Similar in appearance to the popular 44T, this handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors, and attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Optimum Speed Range- 3,000-10,000 rpm.Max. Operating Speed- 18,000 rpm.

Handpiece specifications: 6" long, 1" in diameter, weight: 4.6 oz.

The No. 50C comes with a set of 6 stainless steel, pre-sharpened cutters:
1.  Gouge #3, Sweep Shallow Cut (A-KC503)
2.  Gouge #4, Sweep Deep Cut (A-KC504)
3.  Gouge #5, Sweep "U" Cut (A-KC505)
4.  Parting Tool #6, "V" Cut (A-KC506)
5.  Chisel #9, Straight Single Bevel (A-KC509)
6.  Chisel #10, Skew SIngle Bevel (A-KC510) 


 

UA10451, Base and Yoke Assembly
Turns your hang-up style motor into a bench top model. Easy to install and includes mounting screws. For use with Series TX, TXH, SR-1/6 and 1/8 hp, and S hang-up style motors.

$45.00

Our Favorite add-on to the standard kit. Gives a large stable platform for the motor

 

 

 

Flexshaft, 77-66 / 93-66
Extend your reach a full 66 inches!Standard kit flexshafts
 are 39 inches long. This will give you over an additional 2 feet of reach. A big plus when working around very large trees.

$29.00

 

 

MH-5 Motor Hanger 
With Handpiece rest

$38.00

Motor hanger with clamp attachment.
This motor hanger features a solid rod with mounting clamp (BC-1) for attaching to any bench top up to 2-1/4" thick. The rod height can be adjusted with the locking screw built onto the clamp. The MH-5 comes with a Handpiece Rest (HR-2) that slides onto the hanger pole and secures your handpieces when not in use
.

 

 

MH-6 Motor Hanger
With Handpiece Rest

$48.00

Motor hanger with base. The MH-6 Motor Hanger features a solid rod and mounting base (BC-2) that screws onto top or side of the bench. It comes with a Handpiece Rest (HR-2) that slides onto the hanger pole and secures your handpieces when not in use.


 

 

 

EM table top dial speed control
EM table top speed control is constructed of heavy-duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. Interchangeable and can be teamed up with SR, SRB, L, LB, and older S, SB, SR, SRB, CC and DD motors. (115 volt.)

$45.00

 

 

MB838, Steel Brush, 1/8" shank
Mounted Steel Brush made with .003" wire in a wheel has a 1" head dia. and 5/16" trim length, 1/8" shank, max speed: 25,000rpm.

$2.10

Steel brushes are suitable for  deburring, cleaning, edge blending, and other surface texturing and preparation. Made with either .003" or .005" wire.
Max. speed rating- 25,000rpm. Made in USA.


 
 

MB68, Brass Brush, 1/8" shank
Mounted Brass Brush made with .005" wire in a wheel has a 1" head dia. and 5/16" trim length, 1/8" shank, max speed: 25,000rpm.

$2.00

Brass brushes are suitable for use on wood surfaces for cleaning, edge blending, and other surface texturing and preparation. Brass is an option to steel when you want a softer finish. Made with either .003" or .005" wire.
Max. speed rating- 25,000rpm. Made in USA.


 

B-1 Carbide Bur
Carbide bur with standard flutes in ball shape has a 1/8" head dia. and 1/8" head length, 1/8" shank, max speed: 100,000rpm.

$7.25

Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. Cross cut flutes produce finer chips and leave and smooth finish but are not as aggressive as standard flutes. 1/8" shank


 

328 Hardened Black Steel Cutter
Hardened Black Steel Cutter-328 for relief carving and carving in the round in hard or soft wood. 1/4" head dia. x 3/16" head length, 1/8" shank. Max. speed 45,000 rpm.


$5.75

 

 

301 Hardened Black Steel Cutter
Hardened Black Steel Cutter-301 for relief carving and carving in the round in hard or soft wood. 1/4" head dia. x 1/16" head length, 1/8" shank. Max. speed 45,000 rpm.


$4.00

 

 

302 Hardened Black Steel Cutter
Hardened Black Steel Cutter-302 for relief carving and carving in the round in hard or soft wood. 9/32" head dia. x 1/32" head length, 1/8" shank. Max. speed 45,000 rpm.

$5.50

 

 

306 Hardened Black Steel Cutter
Hardened Black Steel Cutter-306 for relief carving and carving in the round in hard or soft wood. 15/32" head dia. x 1/8" head length, 1/8" shank. Max. speed 45,000 rpm.

$7.75

 

 

7153 Steel Cutter
Steel Cutter-7153 for shaping, grooving, slotting, and cutting in wood, plastic, and soft metals. 3/8" head dia., 1/16" head length, 1/8" shank. Max. speed 45,000 rpm.

$6.25

 

 

10089 Square Bur Holder
Small Square Bur Holder with clear plastic cover conveniently stores and organizes 52 accessories.

$2.95

Holder has 34 holes for 3/32" shank burs and 18 holes for 1/8" shank burs. It measures 2-1/2" square. Holds burs up to 2" long.


 

 

Join Our Mailing List
Email:

Any person using this website agrees to its terms & conditions by their use of this site.
Copyright 2006 - 2008 Shady Side Bonsai. All rights reserved.